Installation

How to install the NIPA® Umbrella palapa umbrella kit

Palapa umbrella kit: how to install your NIPA® Umbrella, with the installation video and numbered steps. WhatsApp support +1 (863) 243-0114.

8 sidesØ 3.1 m and 3.1 m high
2 boxesEverything included in the kit
350 screwsM4.8 × 14 mm self-tapping
1 drillOr a screwdriver: it is all you need
Step by step

Installation video

Thank you for choosing the NIPA® Umbrella palapa umbrella kit. Here you can install your palm umbrella step by step: watch the video and follow the numbered steps. If you have questions, write to us on WhatsApp at +1 (863) 243-0114.

The installation video will be available here very soon.

If you have questions while assembling it, write to us on WhatsApp and we will help you step by step.

What is in each box

The kit arrives in 2 boxes and does not include a printed manual: this page is the installation guide (the QR code on the box brings you here). To assemble it you need a drill or screwdriver.

NIPA® Umbrella kit box 1: aluminum frame and pole
Box 1

Frame and post

2-section post, 8 aluminum beams, 32 pre-cut rails (sets 1 to 4), 16 swivel connectors, 4 bolts and 350 M4.8 × 14 mm self-tapping screws.

NIPA® Umbrella kit box 2: synthetic thatch panels and base
Box 2

Thatch roof and base

24 rails (sets 5 to 7), 66 pre-cut thatch panels, 4 full hip and ridge pieces, 48 one-third hip pieces, 8-way central hub, 8 struts, support cone, thatch cap, top finial and base.

Steps to install your palapa umbrella

  1. 1. Open the 2 boxes and check the parts against the list above.
  2. 2. Place the base on firm, level ground and mount the 2-section pole on it. On sand, flooring or a slab, secure the base with the anchoring your installer specifies for that surface.
  3. 3. Assemble the frame: the 8 aluminum beams join the pole with the central hub and the swivel connectors, and the 8 struts support them from the pole.
  4. 4. Screw the rails to the beams from the bottom up: each set has 8 rails, from set 1 (the longest, 1,025 mm) at the bottom to set 7 (the shortest, 140 mm) at the top.
  5. 5. Lay the NIPA synthetic thatch panels from the bottom up, starting at the edge, and screw them to the rails with the self-tapping screws from the kit.
  6. 6. Cover the 8 hips with the corner pieces (the 1/3 pieces and the 4 full ones), from the bottom up.
  7. 7. Finish the top with the support cone, the palm hat and the final cap with rope texture.
  8. 8. Check that all screws are tight before using it. The 2 spare panels let you replace a piece if it is ever damaged.

Make your palapa umbrella last for years

Your umbrella looks natural and lasts for years thanks to the material: the NIPA synthetic thatch leaves are molded from natural palm leaves, are fully waterproof and keep their original color for decades. The covering of your NIPA® Umbrella is NIPA Essential synthetic thatch, with a 10-year warranty: no cracking or breaking. Check the fixings and clean the leaves from time to time to keep it like new.

Need help or more palapa umbrellas?

Write to us on WhatsApp at +1 (863) 243-0114 or at sales@nipapalma.com. If you are fitting out a hotel or a beach club, we recommend the NIPA Premium line, with an FR version and a 20-year warranty, and we quote by volume.